The P00B7 code on a Chevy Cruze refers to a fault in the engine coolant flow. Specifically, it indicates that the engine control module (ECM) has detected a low flow of coolant through the engine.

P00b7 Code on a Chevy Cruze

This code can be caused by a number of different issues, including a faulty thermostat, a blocked or clogged radiator, a malfunctioning water pump, or a problem with the engine’s cooling system sensors. It can also be triggered by a software issue in the ECM itself.

To diagnose and fix the problem, it’s recommended to take the vehicle to a qualified mechanic or dealership. They will typically perform a thorough inspection of the cooling system, checking for any obvious issues like leaks or damaged components.

They may also use specialized diagnostic tools to check for specific faults and to reset the ECM to clear the code.

Overall, it’s important to address a P00B7 code as soon as possible to prevent potential engine damage and ensure the reliable performance of your Chevy Cruze.

P00b7 Code on a Chevy Cruze Causes

Table: Possible causes of the P00B7 code on a Chevy Cruze and comments on each cause:

CauseComments
Faulty ThermostatA faulty thermostat can cause the engine to run too hot or too cold, which can result in poor coolant flow and trigger the code
Blocked or Clogged RadiatorA blocked or clogged radiator can restrict coolant flow and cause the engine to overheat, triggering the code
Malfunctioning Water PumpA malfunctioning water pump can prevent coolant from circulating properly, leading to poor engine performance and the code
Problem with Cooling System SensorsIssues with the coolant temperature sensor or other cooling system sensors can cause incorrect readings and the code
Software Issue in the Engine Control ModuleSometimes, the code may be caused by a software issue in the ECM itself, which can be fixed by updating or reprogramming the module

Code P00b7 on a Chevy Cruze possible symptoms

Here’s a table summarizing the possible symptoms of the P00B7 code on a Chevy Cruze and comments on each symptom:

SymptomsComments
Check Engine Light OnThe P00B7 code will trigger the Check Engine Light (CEL) to illuminate on the dashboard, indicating that there is a problem with the engine
Poor Engine PerformanceA decrease in engine performance, such as reduced power or acceleration, can occur when the engine is not receiving enough coolant flow
Overheating EngineIf the engine is overheating due to poor coolant flow, it can cause damage to the engine and other components. This can also trigger other warning lights on the dashboard
Low Coolant LevelLow coolant levels can indicate a coolant leak or poor circulation, which can trigger the P00B7 code
Poor Fuel EconomyReduced fuel economy can occur when the engine is not running at optimal performance due to poor coolant flow and other related issues

Please note that these symptoms may not always be present or may vary in severity depending on the specific cause of the P00B7 code.

A qualified mechanic or dealership can help diagnose and fix the problem to ensure reliable performance of your Chevy Cruze.

P00b7 code on a Chevy Cruze Tech Note

Here are some technical notes regarding the P00B7 code on a Chevy Cruze:

P00b7 code on a Chevy Cruze Description

The P00B7 code on a Chevy Cruze is a generic OBD-II trouble code that indicates a low flow of engine coolant through the engine. Specifically, it means that the engine control module (ECM) has detected a lower than expected coolant flow within the cooling system.

The code is usually triggered when the engine coolant is not flowing as it should, which can result in poor engine performance, overheating, and other related issues. The code may be accompanied by other symptoms, such as reduced power or acceleration, a decrease in fuel economy, or the illumination of the Check Engine Light (CEL) on the dashboard.

Possible causes of the P00B7 code on a Chevy Cruze include a faulty thermostat, a clogged or blocked radiator, a malfunctioning water pump, or issues with the cooling system sensors. It can also be caused by a software issue in the ECM itself.

To diagnose and fix the problem, a qualified mechanic or dealership may perform a thorough inspection of the cooling system, including checking for leaks, damaged components, and proper coolant flow. They may also use specialized diagnostic tools to check for specific faults and to reset the ECM to clear the code.

Overall, it’s important to address the P00B7 code as soon as possible to prevent potential engine damage and ensure reliable performance of your Chevy Cruze. Regular maintenance of the cooling system, including coolant flushes and inspections, can help prevent issues that may trigger the code.

What is the Cost to Diagnose the Code P00B7 Chevrolet?

The cost to diagnose the code P00B7 on a Chevrolet Cruze can vary depending on several factors, including the location of the repair shop, the mechanic’s experience, and the specific cause of the problem.

In general, you can expect to pay between $80 and $150 for a diagnostic test that will identify the root cause of the problem triggering the P00B7 code. However, if the issue is complex or requires extensive testing and repairs, the cost may be higher.

Once the problem is identified, the cost to repair it can also vary depending on the specific issue. For example, replacing a faulty thermostat or water pump may cost between $200 and $500, while repairing or replacing a clogged radiator can cost between $500 and $1,000.

Engine Coolant Flaw error codes on a Chevy Cruze

Here’s a table summarizing some of the engine coolant flow error codes that may appear on a Chevy Cruze and comments on each code:

CodeDescriptionComments
P00B7Low engine coolant flowIndicates a low flow of engine coolant through the engine, which can result in poor engine performance, overheating, and other related issues
P0128Coolant thermostat (coolant temperature below thermostat regulating temperature)Indicates that the engine coolant temperature is not reaching its expected operating temperature, which can result in poor fuel economy and engine performance
P2181Engine coolant temperature (ECT) sensor circuit range/ performanceIndicates an issue with the ECT sensor circuit, which can result in incorrect engine coolant temperature readings and poor engine performance
P1258Engine coolant overtemperature – protection mode activeIndicates that the engine coolant has reached a temperature that is higher than its expected range, which can result in engine damage and other related issues
P1299Cylinder head overtemperature protection activeIndicates that the cylinder head temperature is higher than its expected range, which can result in engine damage and other related issues

How tp fix Code P00B7 on a Chevrolet Cruze?

The specific steps to fix code P00B7 on a Chevrolet Cruze will depend on the underlying cause of the problem. Here are some general steps that may be taken:

  1. Inspect the cooling system: A mechanic may perform a visual inspection of the cooling system, checking for leaks, damaged components, and proper coolant flow. They may also check the coolant level and quality.
  2. Test the thermostat: The mechanic may test the thermostat to make sure it is opening and closing properly. If the thermostat is found to be faulty, it should be replaced.
  3. Check the water pump: The water pump is responsible for circulating coolant through the engine, and a malfunctioning pump can cause poor coolant flow. The mechanic may check the water pump for signs of damage or wear, and replace it if necessary.
  4. Inspect the radiator: A clogged or damaged radiator can restrict coolant flow and cause the P00B7 code to appear. The mechanic may inspect the radiator and clean or replace it if necessary.
  5. Test the cooling system sensors: Issues with the coolant temperature sensor or other cooling system sensors can cause incorrect readings and trigger the P00B7 code. The mechanic may test these sensors and replace them if necessary.
  6. Check the engine control module: In some cases, a software issue in the engine control module (ECM) can cause the P00B7 code to appear. The mechanic may reset the ECM or reprogram it to fix the issue.

The cost to fix the P00B7 code will depend on the specific cause of the problem and the extent of the necessary repairs. It’s recommended to take the vehicle to a qualified mechanic or dealership for proper diagnosis and repair.

Wrap up

In summary, the P00B7 code on a Chevrolet Cruze indicates a low flow of engine coolant through the engine, which can result in poor engine performance, overheating, and other related issues.

The code can be caused by a faulty thermostat, a clogged or blocked radiator, a malfunctioning water pump, or issues with the cooling system sensors.

To fix the problem, a mechanic may inspect the cooling system, test the thermostat and water pump, check the radiator, test the cooling system sensors, and check the engine control module.

The cost to fix the P00B7 code will depend on the specific cause of the problem and the extent of the necessary repairs.

Regular maintenance of the cooling system can help prevent issues that may trigger the code, and it’s important to address the problem as soon as possible to prevent potential engine damage and ensure reliable performance of your Chevrolet Cruze.

Other Chevy Cruze Codes you Might Want to Check

P0299 code on a Chevy Cruze 2
P0106 code on Chevy CruzeP0420 code on a Chevy Cruze
P015B on a Chevy CruzeP0599 code on Chevy Cruze
P0171 code on a Chevy CruzeP2227 code on a Chevy Cruze
P0299 code on a Chevy Cruze